tapered roller bearing requires a fixed position in three directions radial

Ntn bearing in use to give a strong impact , will have scars and indentations, become cause of the accident . Severe cases, crack, fracture, it must be noted .
Avoid ntn bearings with lysn roller bearing existing workers instead must use the right tools . We have always stressed the importance of the tool , because there are too many customers are using the wrong tool in the installation resulting in a spherical roller bearing damage.
The shaft and bearing , the bearing requires a fixed position in three directions radial, axial and lysn tapered bearings tangential direction . Radial and tangential positioning through the tight fit of the bearing rings achieve mining , axial positioning only in a few cases a tight fit ; generally limit the use of axial parts , such as the cap and ring, etc. will limit the axial position in the clearance range.
Should be selected with the focus on the following four points:
( 1 ) of the bearing rings and the circumferential surface should be well supported even by force , in order to reduce distortion , and give full play to the carrying capacity spherical roller bearings .
( 2 ) rings in its tangential direction with not slide surface , otherwise it will damage the mating surfaces .
( 3 ) the free end of the bearing must be able to change the length of the shaft and housing bore fit , which must have the ability to adapt to the axial position within a certain range of swimming .