paired tapered bearing is composed of the following five components

paired tapered bearing system is composed of the following five components: controller, rotor, solenoids, sensors and power amplifiers. One of the most critical component is the controller. Controller performance largely determine the performance of the magnetic bearing system. paired tapered bearing Control law controller determines the dynamic performance and stiffness of the magnetic bearing system, damping and stability. The controller is divided into two kinds: Analog controllers and digital controllers. Compared with the digital controller analog controller has the following disadvantages :( a) adjustment inconvenient; (b) it is difficult to implement complex control; (c) can not simultaneously achieve two or more degrees of freedom control; (d) mutual change is poor, that is, different magnetic bearing controller must have a corresponding; large (five) power consumption, large volume and so on. paired tapered bearing to be widely used, the difference between analog controller to adjust the performance of online say that Cylindrical roller bearing  is one of the reasons, therefore, the direction is the development trend of digital magnetic bearing. At the same time, to achieve intelligent magnetic bearing systems, analog controller is obviously difficult to meet this requirement. Therefore, to improve the magnetic bearing from the performance, reliability, and enhance the flexibility and reduce the volume controller, power, and in the future to network, intelligent direction angles, the controller must implement digitization. The last three decades has been the rapid development of control theory and made widely used. Magnetic bearings, is a new high-performance bearings. Compared with conventional ball bearings, plain bearings and oil film paired tapered bearing, magnetic bearings there is no mechanical contact, Stainless steel slewing bearing the rotor can reach very high operating speed, with a small mechanical wear, low energy consumption, low noise, long life, no lubrication, no oil pollution etc., especially for high-speed, vacuum, clean and other special environment. It can be widely used in machining, turbo machinery, aerospace, vacuum technology, rotor dynamics identification and other tests in the field, is recognized as a very promising new bearings.